
MPB 840
5
E
n
g
lis
h
MPB 840 Indicator lnstructions
Press the power button once to trigger the LED indicators and reveal the remaining power
state. The number of lit LED
indicators reflects the remaining power state:
. The LED lights will turn off when the device is fully charged.
. The LED lights will light for 10 seconds when it starts to charge another device.
. The LED lights will remain unlit when the battery is empty.
1. To protect the long-term capacity of your device's battery, we recommend you unplug
the power wire promptly after the device is fully charged.
2. During the charging process, the MPB 840 will consume about 30% of total capacity,
including power loss from circurt heat and voltage conversion.
3. Since the combined output of both po.s is limited to 2A, concurrent use of the two pods
will make the charg.ng speed twice as slow,
4. Many mobile internet devices such as the iPad charge at 2A. Please refer to your
device's manual to identify the ideal Amps / charging port.
5. The optional film on the mirrored front surface is provided to protect your device from
scratches. Feel free to peel it off according to your preference.
If the MPB 840 fails to charge:
A Check that the adapter connection is secure.
B Replace the adapter if the current adapter does not fundion normally.
If the MPB 840 fails to charge other eleatronic devices:
A. Check that the connection between the MPB 840 and the electronic device is secure.
B. Check that the MPB 840 still holds a charge, and recharge when remaining power is
low.
C Check that the MPB 840 voltage is compatible wíth the electronic devrce's required
charqe.
Note
FAQ & Solution