ENG 6
First Time Installation
If everything is con-
nected properly, the
right signal source has
been selected and the
power supply LED on
the receiver stick lights
up, you will see the
following XORO instal-
lation menu on the TV
screen. Use the arrow
keys ▲/▼ to navigate among menu items. If a menu
item is highlighted you can use the ◄/► keys to make
changes.
OSD Language
:
Set the OSD language.
Country
Select the country in which the receiver is to be oper-
ated.
Antenna Power
In case your antenna needs to be supplied with power
(e.g. an indoor antenna with an amplifier but no power
supply unit) by your receiver you need to activate this
function in the menu.
Channel Search
Initiate the scan mode by pressing
OK
. It can take a
couple of minutes to complete the scan.
In case not all channels appear in the list after the
scan you need to readjust the antenna or use a more
powerful antenna and repeat the scan mode.
Note:
In Germany no DVB-T/T2 radio channels are
transmitted.
After moving to another region you have to repeat
the scan mode.
