ENG 7
4. Installation
You should install the receiver when powering on your product for the first time after
purchase.
The default password is
0000
. If you have forgotten your password, please contact
your local product distributor.
4.1 Powering On
1. Connect the power cord of the product to a wall outlet.
2. Ensure the
ON/OFF
switch at the rear of the product is switched to
ON
.
3. Power on by pressing the
STANDBY
button on the remote control or the
STANDBY
button at the front of the product.
4.2 Antenna Settings
Antenna Settings
allows you to configure the antenna setting parameters.
Menu->INTALLATION->Antenna Settings
1.
Satellite
:
Highlight the
satellite you want to search.
2.
Transponder (TP for short)
:
Press the
VOL+/VOL-
button to
change the TP.
3.
Tuner: Press
the
VOL+/VOL-
button to change
the tuner.
4.
LNB Type
:
Press the
VOL+/VOL-
button to change the LNB frequency.
5.
LNB Power:
Press the
VOL+/VOL-
button to select the required LNB power.
Summary of Contents for HRS9190
Page 1: ...Bedienungsanleitung DE Quick Start Guide ENG HRS 9190 LAN...
Page 2: ......
Page 44: ...Quick Start Guide HRS 9190 LAN...
Page 63: ......