16
HRS 8530
Engl
ish
Initial Installation
Initial Installation
The XORO installation menu will be displayed by initial operation of the HRS8530. This menu con-
tains four options:
1.
OSD Language
2.
Country
3.
Channel search
4.
Load the pre-inst.
Navigate with the arrow keys
CH+
and
CH–
to high
light the option and make the selection with the
VOL–
and
VOL+
buttons.
OSD Language
Choose the menu language.
Country
Select the country where you use the HRS8530
Channel Search
satellite receiving system fulfill following criteria:
x
System with rotatable antenna
x
System with more than one antenna or LNB (DiSEqC)
x
System with nonstandard components
Most of the customers could complete the installation by selecting “load the pre-inst.”.
Load the Pre-inst.
A program list of the satellite ASTRA 19.2° is saved in
the factory firmware. German TV programs top this list.
In most cases, the installation is completed with loading
the program list.
Select the OSD language and country and decide
Press
OK
to confirm.
x
The first TV program will be shown on the
screen after loading the pre programmed list. If
there is no TV program to be seen, please
check the cable connection, Antenna Set up
and carry out the channel scanning.
x
Please select “Channel Search/Satellite Setting” to define further parameters for a scanning, if your
whether to load the pre installed program list.
If you have chosen not to take the pre installed list, there appears a “Dish Setup” menu on
the screen.
For the case there appears no “Installation Guide” menu after connection and power on, please read
the page 35 to reset the device.
Summary of Contents for HRS 8530
