ENG
12
HRS 2500
Engl
ish
Connection
Basic connection:
•
Ensure that the power switches of this unit and other equipment to be connected,
are turned off before commencing connection
•
Read attentively the instructions before connecting other equipments
•
Ensure that you observe the color-coding when connecting audio and video cords
•
Please connect the unit with TV by only one kind of video output format, and setup a
suitable output mode (including signal mode and signal code type), otherwise there
will be image distortion.
REMARKS:
User can choose any proper connection format according to the jacks of the TV set.
CONNECTING TO TV SET AND TO THE DISH
The schematic pictures shows the connection
between the HRS 2500, the TV set and to the
satellite dish.
How to connect:
A.
Plug a SCART cable to the SCART
TV connector of the DVB-S receiver
and the other end to the TV set.
B.
Plug the antenna cable to the input,
called LNB In. Screw the connector
tightly.
C.
Please pay attention that all plugs are
connected correctly.
D.
Connect the power cable and the
plug to the wall outlet.
E.
Switch on the HRS 2500 when the
power indication light shows a red
light.
F.
Choose on your TV set the SCART input
To TV Set and Aerial
