XV0500 Video MCU User's Guide
Page 27 of 30
Xorcom Ltd.
● P.O. Box 60, Misgav Industrial Park 20174 ● Tel: +972 4 995-1999 ●
www.xorcom.com
Appendix A: How to change MCU-DSP IP settings
Changing the IP address is performed via serial connection (i.e. HyperTerminal in Windows or Minicom in
Linux).
Note!
The MCU-DSP card has built-in RS-232/USB adapter. When the MCU-DSP card is connected for the first
time to a PC by the USB cable, the system recognizes a new USB device and the user needs to install a driver
for it. The USB device is called CP2103 (made by Silicon Labs) and its driver can be found on the Silicon Labs'
Web site: http://www.silabs.com/products/interface/usbtouart/Pages/usb-to-uart-bridge.aspx
Step‐1
: Configure your PC COM port as follows:
•
Bits per second: 115200
•
Data bits: 8
•
Parity: None
•
Stop bits: 1
•
Flow control: None
Step‐2
: To change the board’s IP address, type
ppc_ip_config 0 @<IP_address>
For example:
ppc_ip_config 0 @10.10.20.20
Step‐3
: Type
board_reset
Step‐4
: Type
board_info
to show the board’s information:
