SIP Parameters
In order to configure server options, XT-20P communication protocol should be
SIP
.
SIP Server
The address of the SIP server of the device. Please fill in the IP address or
domain name of the SIP server correctly. Do not modify without special situation (default is 5060).
Account
The SIP account of the terminal, it cannot repeat with other terminals.
Password
The SIP account registration password.
Local Port
Configure the local port according to actual situation.
Audio Port
Configure the audio port according to actual situation.
Switch to Multicast
Calling transfer to multicast can be enabled settings (calling transfer to multicast, when receiving
the SIP call initiated by IP phones, the multicast streams will be sent to itself and SIP speakers).
Audio Codec
The audio codec that XonTel XT-20P will use.
Destination multicast
address
Enable calling transfer to multicast, when IP phone initiate call to SIP account, it is
available to initiate multicast to “destination multicast address and port”, other terminals
under the multicast address will receive multicast broadcasting.
Assistant ringing
account
Enable and set up the assistant ringing SIP account, once any talk or broadcast to the
assistant ringing account, the speaker will output the ringing sound.
The ringing SIP account and the SIP phone can be put into a group. When calling to group phone,
all terminals in the same group will be ringing. The ringing will be stopped after the call be
connected.
Ringing SIP
account/password
Set ringing SIP account /password