5
2.
Daily use
2.1
Making a call
Press the call button to call out the predefined number or IP address
and if LED turns green, it means the call has been answered.
2.2
Receiving a call
User can use IP phone or indoor monitor to call XT-10P and XT-10P
will answer it automatically by default. If user disable auto answer,
user should press push button to answer incoming call.
2.3
Unlock by RF Card
Place the predefined RF card on the card sensor area. The door
phone will announce ‘
the door is now opened
’ and open the door.
13.56MHz and 125KHz RF cards is supported by XonTel XT-10P.
