Public Broadcasting IP Phone
www.sahabtec.com
sahab
tec
integrated business solution
In compliance with the following procedure, S21P Speaker can be installed into the
ceiling.
2.1 Ceiling entrance specification
Cut out an installation hole of Ø170mm ~Ø180mm on the ceiling (Figure
②
), Notice: The
figure is just for your reference, as below
2.2 Installation of speaker equipment
1
、
open the cover (use a small hook to make steel mash up) (Figure
①
);
2
、
Through the cut-down hole, build the speaker in, after the built-in, use screw driver to
remount the four binding post. (Figure
③
)
;
3
、
3
、
When installation completed, load the steel mash back to speaker, then electrify
and test it
.
3. Configuration of speaker
Before you adjust the speaker, you need to know the IP address of the speaker. there a
way you could learn how to get the IP address below. IP address will be gained by DHCP;
you could press the second button from the left side. And it will let you know the speaker
