background image

EN

Topic: 

Installation

5

XOMAX

https://www.xomax.de

Installation

  

WARNING!

Please read these advices carefully 
before installation procedure. 

The damages caused by an inappropriate 
installation are not covered by warranty. 

To avoid the risk of losing the warranty 
please let a specialist accomplish the 
installation of the unit.

 

 

»

To avoid a short circuit please 

disconnect the vehicle battery before 
the installation. To do it properly please 
read the manual of the vehicle.

 

»

Please be aware that this unit has 

an SingleDIN standart size. Make sure 
that your vehicle is equipped with an 
installation cell of required size.

 

»

As may be the case you will need a 

suitable faceplate, adapter or other 
accessories. These could be provided 
from your local specialist supplier.

 

»

The connection cables may not be 

cutted or short-circuited. Otherwise the 
warranty becomes invalid.

 

»

Before the installation please make 

sure that the vehicle has the 12 Volt 
on-board power supply.

 

We recommend you to let a 

professional technician install the 
unit in your vehicle.

!

!

 

»

The minus (-) should be connected 

with the ground (GND) (negative).

 

»

Please tag the polarity of the avai

-

lable speakers before you disconnect 
the vehicle battery.

 

»

A proper grounding of the unit's 

housing requires a clean ground 
connection. Thus the grounding area 
should be rust-, stain- and dust-free.

 

»

Please ground the cable separately 

from other heavy current devices such 
as an amplifier etc.

 

»

Please ensure that the coloured 

cables are connected according to the 
wiring diagram. The wrong wiring may 
lead to malfunctions or even damages 
of the electric elements of the vehicle.

 

»

Please note that the connection 

cables of this unit and of the other 
devices may have the same purpose 
but the different colour. For this reason 
while connecting this unit with the 
other devices please ensure that both 
of the cables in each case have the 
same purpose. To configure everything 
correctly please refer to the manuals of 
the both devices.

 

»

Please ensure that the negative 

speaker cable is in each case plugged 
into the negative speaker socket of the 
ISO interface. Do not ever connect the 
negative speaker cables with the vehicle 
body.

 

»

This unit is designed and construed 

for connection with 4 speakers. Do not 
combine this unit with devices that are 

designed and construed for connection 

Summary of Contents for XM-V746




















Reviews: