background image

EN

Topic: 

Rear view camera and steering wheel remote control

16

XOMAX

https://www.xomax.de

Poor radio reception:

 

The radio tuner finds no 
broadcaster or the recep-
tion is poor.

For problem-solving regarding the radio reception it 
is important to know the type of the antenna of your 
vehicle. 
 
Here are the possible solutions for each type of the 
antenna: 
 

Type 1 – passive antenna:

 

We recommend you to substitude the existing antenna 
by the larger and therefore more efficient one.  
 
Shark fin or rod antennas (under 5 cm) are definitely 
insufficient. 
 

Type 2 – active antenna:

 

The vehicle provides no current for the active antenna. 
In this case a phantom power is required, which provides 
the active antenna with the external power supply. 
 

Type 3 – active antenna with diversity system:

 

The unit provides no current for the active antenna and 
has no diversity support. For this type of antenna is 
required the phantom power with an integrated diversity 
system.

Note:

 

A phantom power is not to be confused with an antenna 
amplifier which is far less efficient.

Radio stations are lost:  

As soon as the unit will be 
turned off all the stored 
stations and users settings 
will be lost.

This problem is caused due to a wrong connection of the 
ISO cable. 
 
Please interchange the cables for ignition plus  and for 
steady plus. 
 

Caution:

 

If these wires have fuses the latter should be interch-
anged as well.

Summary of Contents for XM-V417


















Reviews: