4.Technical Parameters
Tuner Part:
FM Frequency Range------------------------------------------------------87.5MHz-108MHz
FM noise-limited sensitivity-----------------------------------------------------------FM
≤
26dB
FM signal to noise ratio (S/N)------------------------------------------------------------
≥
45dB
USB/MMC/SD Part:
Frequency Response---------------------------------------------------100Hz-10kHz(+10dB)
MP3 bit rates------------------------------------------------------------------------------8-320kbps
Channel balance---------------------------------------------------------------------------
≤
3 dB
Channel Separation -------------------------------------------------------------------
≤
22dB
MP3 Signal to noise ratio (S/N)---------------------------------------------------------
≥
55dB
Working voltage -------------------------------------------------------------------------12V DC
Real power output-------------------------------------------------------------------4x60W/14.4V
Speaker impedance ---------------------------------------------------------------------
4Ω
-
8Ω
Size dimension--------------------------------------------180mm(W)x52mm(H) vx115mm(L)
4.Wiring Diagram
Fault
Reasons
Solutions
3. Enter DAB+ radio mode:
Press the MODE button until the DAB radio mode "DAB" is shown on the display.
AMS Automatic search:
Press the "BND/AMS" button on the front panel for about 2 seconds to start the automatic
channel scan.
The radio will automatically search for stations with strong signals.
Switching stations:
Press the or button on the front panel to switch between stations in the
appropriate direction.
