EN
Topic:
Installation
7
EN
»
The speakers should feature the
impedance of 4-8 Ohm and a sufficient
wattage.
»
Please ensure that the speakers you
are connecting with the unit are intact.
Damaged speakers can impair the unit.
»
To avoid a short circuit please isolate
all cable junctions and endings of the
unused cables with the electrical tape.
»
All the cables should be layed and
fixated tidy and properly. The cables
should not contact any movable or hot
objects.
»
If the vehicle doesn't have an "ACC"
ignition position, please connect the
red cable with the ignition switch.
Otherwise the unit does not turn off
automatically, causing the discharging
of the vehicle battery.
»
To avoid a rogue and hazardous
short circuit do not lay the yellow cable
through the engine bay in order to
connect it with the vehicle battery.
»
Do not ever connect speaker cables
among one another. In case you do not
want to connect all the 4 speakers with
the unit please isolate the endings of
unused cables with the electrical tape
to prevent a short circuit.
»
Do not ever connect the negative
speaker cables with the vehicle body.
»
To ensure a flawless performance of
the unit the intergration angle should
amount to +/- 30°.
