RADIO OPERATION
Change Bands (BAND)
Press the
BAND
button to switch between the FM1, FM2 and FM3 band.
Each band stores up to six preset stations.
Manual Tuning ( / )
Press and hold the
or
button on the front panel or on the remote control to enter manual
tuning mode. In manual tuning mode, press the
or
button to move the radio frequency
number up or down one step.
Auto Seek Tuning ( / )
In standby mode or while not in manual tuning mode, quickly press the
or
button to
move to the next/previous available station automatically.
or
.
STEREO/MONO
FM station is received in stereo mode. However, if the signal
weak or reception is not as
good as you would like, switching to MONO mode usually improves the overall sound quality.
To Store / Recall Preset Stations
The radio can be stored 6 preset stations for each band (FM1, FM2, FM3) for a total of 18
preset stations.
To memorize a station:
- Turn the radio on and select the desired band and station.
- Select a station by
button
- Press and hold the desired preset button (numbered 1-6 on the face of the radio) for more
than 2 seconds to save the station to that preset number.
- To recall a preset station:
- Select the desired band.
- Briefly press a preset button (numbered 1-6) to recall the corresponding preset station.
Automatic Store station/ Preset station scan (AMS)
Press and hold the
AMS
button for more than 2 seconds to select six strong stations and store
them in the current band. The radio will automatically scan the current frequency and enter
the six strongest stations into the preset memory positions for that band.
Briefly press the
AMS
button on the remote control to recall each preset station that saved in
the memories in each band.
is
Press the
ST
button on the remote control to choose FM STEREO or MONO audio effect.
LOCAL/DX
In urban areas, most stations are strong enough and“LOCALON”mode should be selected.
Switch to LOCALOFF mode to search for stations with weaker signals.
Press the
LOC
button on the remote control to choose local or distant reception mode.
Using the PTY seach function
Press and hold the
PTY/MUTE
button on panel or press the PTY button on the remote control
can switch between PTY speech group and PTY music group. “NEWS”(speech) or
When PTY group is on, pressing one of 6 numbered (1~6) buttons can select one of typed
program.
The PTY function allows you to search for a particular program type.
“POP M”
(music) will appear on the LCD display.
When you select the speech/ music pty group, the numbered (1~6) buttons are shared as
follows RDS station programs:
7
