XOCECO TK2026, Service Manual

Page: 9 / 56

7
4.16.2 turn on the unit in the STANDBY state
Press CH+/CH- buttons turn on in the STANDBY state.
4.16.3 Information of software version
Enter MEU9 of the factory menu in the top.
4.16.4 “STANDARD”, “COLORFUL” and “ SOFTNESS”
a).Enter MENU5 Mode of the factory menu
b).charge their for seemly analog quantity, then return standard option.
Chart 1 I
2
C TDA (NOM)8377-B-6NA E
2
PROM pre-set data
I
2
C standard UOC for export bus control adjustment item default setting
MI Items range Preset
M0 SUBCON 0-63 56(sub-contrast)
SUBCOL 0-63 56(sub-chroma)
SUBSHP 0-63 48(sub-acutance)
SUBTINT 0-63 31(sub-hue)
AKB ON/OFF ON
M1 V.SLOPE 0-63 36(field center adjustment)
V.SHIFT 0-63 32(field point adjustment)
V.SIZE 0-63 36(field amplitude adjustment)
V.SC 0-63 32(field line )
HSHIFT 0-63 32(line point adjustment)
PROGRAMA.NO 2(channel)
M2 AGCTAKEOVER 0-63 21(AGC adjustment)
SHIPPING 0(leave factory set)
M3 BT 0-100 75(adjust white balance of brightness)
CT 0-100 75(adjust white balance of brightness contrast)
SC 0
RB 0-63 32(red cut off level adjustment)
GB 0-63 32(green cut off level adjustment)
RD 0-63 32(red cut off level adjustment)
GD 0-63 32(green cut off level adjustment)
BD 0-63 32(blue cut off level adjustment)
SB 0-63 40(sub brightness adjustment)
M4 OSD.V.POSITION 0-63 15(OSD position)
OSD.H.POSITION 0-63 25(OSD H-position)
BTSC-MODE MONO/STEORO MONO(STEORO,SAP )
BTSC-ST 0-15 13
BTSC-SP 0-15 12
BTSC-L1 0-15 1