XOCECO LC-27R18, Service Manual

Page: 17 / 42

15
6. FLI2310
The FLI230x and FLI2310 are highly integrated digital video format converters for DTV and DVD
applications using patented deinterlacing and post processing algorithms from Faroudja
Laboratories, coupled with highly flexible scaling, a wide variety of aspect ratio conversions, and
other special video enhancing features to produce the highest quality image.
6.1 Inputs
Input all industry standard and non-standard video resolutions, including 480i (NTSC), 576i
(PAL/SECAM), 480p, 720p, 1080i, and VGA to XGA
Digital input, 8-bit Y/Cr/Cb (ITU-R BT656), 8-bit Y/Pr/Pb, 16-bit Y Cr/Cb (ITU-R BT601), 24-bit
RGB, YCrCb, YPrPb
Input pixel rate up to 75MHz maximum
6.2 Outputs
Output resolutions include 480p, 576i, 576p, 720p, 1080i, 1080p, and VGA to SXGA
Interlaced or Progressive output
In the FLI230x, the output can be either analog YUV/RGB (through the integrated 10-bit DAC),
or digital 24-bit RGB, YCrCb, YPrPb (4:4:4), or digital 16/20-bit Y Cr/Cb (4:2:2)
The FLI2301 can provide 525P/625P Macrovision compliant analog output
In the FLI2310, digital output of 24-bit RGB, YCrCb, YPrPb (4:4:4), or 16/20-bit Y Cr/Cb (4:2:2)
are available
Output pixel rate up to 150 MHz maximum
6.3 Formats
Input color manipulation matrix supports all color spaces: RGB, YPrPb, 4:4:4 YCrCb, 4:2:2
YCr/Cb, ITU-R BT656, ITU-R BT601
Output supports analog RGB, YPrPb, and YCrCb in the FLI230x; and digital RGB, YPrPb, 4:4:4
YCrCb and 4:2:2 YCr/Cb in FLI230x/FLI2310
6.4 Frame Rate Conversion
Tearless Frame Rate Conversion 50/60/72/75/100/120 Hz
6.5 Front End Processing
Motion Adaptive Noise Reduction – Improves picture quality for off-air material.
Cross Color Suppressor (CCS) - Removes cross color artifacts in composite video signals due
to poor Y/C separation in standard 2-D video decoders, eliminating the need for expensive 3-D
video decoders.
6.6 Deinterlacing
Per-pixel Motion Adaptive Deinterlacing
Patented FilmMode Processing - Used for proper de-interlacing of 3:2 and 2:2 pulldown
material.
Edit Correction - Film content is continuously monitored for any break in sequence caused by
“bad edits” and quickly compensates for the most effective reduction in artifacts.
DCDi™ - Video is analyzed on a single pixel granularity to detect presence or absence of
angled lines and edges, which are then processed to produce a smooth and natural looking
image without visible artifacts or “jaggies”.
6.7 Scaling
High Quality Fully Programmable Two Dimensional Scaler
Aspect Ratio Conversion for “Anamorphic” or “Panoramic” (non-linear)
Display 4:3 images on 16:9 displays and vice versa, including Letterbox to Fullscreen, Pillarbox,