12
overlay panel dimensions -
M+d<"OhnO'd':+<6:n
counters
595mm
140mm
60mm
5-1 /2”
2-3/8”
23-7/16”
765mm
30”
140mm
5-1 /2”
19”
485mm
MAXIMUM PANEL THICKNESS 3/4” (19mm)
PANEL MAXIMUM WEIGHT: 20 lbs.
AFTER INSTALLATION UNDER COUNTER, OVERLAY DOOR MUST BE ABLE TO OPEN 90 .
o
THE GAP BETWEEN THE BOTTOM OF THE DOOR AND THE FLOOR MUST BE AT LEAST
3” (75mm) TO ALLOW FOR VENTILATION. NEVER BLOCK THE BOTTOM VENTS.
DOOR PANELS MUST BE FINISHED FRONT AND BACK TO PREVENT WARPING.
To ensure that the cabinet panel is completely hiding the door frame, observe the side dimension as minimums
and the center opening height as a maximum.
You may decrease the size of the center opening to reveal less glass by increasing the width of the side sections
and/or the height of the top and bottom sections.
IMPORTANT:
Dimensions shown are suggested only
based on minimum requirements to
conceal the door frame.
Actual cabinet sizes and styles vary.
Always base your final door design on
how the glass portion of the door will
center and align with other cabinets.
In needed, reduce the window reveal.
GLASS MAY BE
COVERED BY A
SOLID PANEL