background image

- 3 -

 

IMPORTANT SAFETY INSTRUCTIONS

 

FOR RESIDENTIAL USE ONLY

  READ AND SAVE THESE INSTRUCTIONS

 

PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.

 

IMPORTANT

: Save these Instructions for the Local Electrical Inspectors use.

 

INSTALLER

: Please leave these Instructions with this unit for the owner.

 

OWNER

: Please retain these instructions for future reference.

  Take care when using cleaning agents or detergents.

  Suitable for use in household cooking area.

 

WARNING

 - To reduce the risk of fire or electric shock, do not use this fan with any 

Solid-State Speed Control Device.

 

CAUTION

 - To reduce risk of fire and to properly exhaust air, be sure to duct air out-

side – Do not vent exhaust air into spaces within walls or ceilings or into attics, crawl 

spaces, or garages.

 

CAUTION

 - For general ventilating use only. Do not use to exhaust hazardous or ex-

plosive materials and vapors.

 

CAUTION

 - To avoid motor bearing damage and noisy and/or unbalanced impellers, 

keep drywall spray, construction dust, etc. off power unit.

 

CAUTION

 - Please read specification label on product for further information and 

requirements.

 

WARNING

 – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, 

OBSERVE THE FOLLOWING:

A. 

Use this unit only in the manner intended by the manufacturer. If you have questions, 

contact the manufacturer.

B.

  Before servicing or cleaning unit, switch power off at service panel and lock the serv-

ice  disconnecting  means  to  prevent  power  from  being  switched  on  accidentally. 

When the service disconnecting means cannot be locked, securely fasten a promi-

nent warning device, such as a tag, to the service panel.

  WARNING - TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

A.

  Never leave surface units unattended at high settings. Boilovers cause smoking and 

greasy spillovers that may ignite. Heat oils slowly on low or medium settings.

B.

  Always  turn  hood  ON  when  cooking  at  high  heat  or  when  flambeing  foods  (i.e. 

ENGLISH

USA

Summary of Contents for XOMI42G





























Reviews: