WARNING
TO RUDUCE THE RICK OF FIRE, ELECTRIC SHOCK OR INJURE TO PERSONS,
PLEASE OBSERVE THE FOLLOWINGS:
1. Installation work and electric wiring (including switch location) must be done by the
qualified person(s) in accordance with local applicable codes and standards, including fire-
rated construction.
2. This hood may have sharp edges. Be careful to avoid cuts and abrasions during installation
and cleaning.
3. The hood must be placed at a minimum distance of 26” and a maximum of 32” from the
cooktop for best capture of cooking impurities and a minimum distance of 28” from gas
range.
4. Provide sufficient air for proper combustion and exhausting of gases through the chimney
of the burning equipment to prevent back drafting. Follow the heating equipment
manufacturer’s guideline and safety standards such as those published by the National Fire
Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air
Conditioning Engineer (ASHRAE), and the local code authorities.
5. Ducted fans must always be vented to the outdoors.
6. This appliance is design to be operated by adults. Children should not be allowed to temper
with the controls or play with this appliance.
7. To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed
control device.
8. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other
hidden utilities.
9. Before servicing or cleaning unit, switch power off at service panel and lock the service
disconnecting means to prevent power from being switched on accidentally. When the
service disconnecting means cannot be locked, securely fasten a prominent warning device,
such as a tag, to the service panel.
10.Use this unit only in the manner intended by manufacturer. If you have questions, please
contact the manufacturer or local agent.
11.This unit must be grounded.
WARNING-TO REDUCE THE RISK OF FIRE, USE ONLY THE METAL DUCTWORK.
3
4
and
ASHRAE.
length)
round
