- 15 -
2. CONNECT ELECTRICAL:
t1PXFS4VQQMZ$POOFDUJPO
For connection to the power supply refer to the following
Fig.6:
1. Break and remove the small circular metal sheet positioned in the rear part of the hood,
with the aid of a flat screw driver
Fig.6
.1.
2. Remove the power supply lid by loosening the 2 screws
A
Fig.6
.2.
3. Connect the wires of the hood to those of the power supply as described
Fig.6
.3:
BLACK
=
L
line
WHITE
=
N
neutral
GREEN / YELLOW
=
G
ground
- A double-pole switch properly rated must be installed to provide the range hood
power supply disconnection.
- Connect the electrical conduit to the Field Wiring Compartment using listed onduit
fittings.
- Carry out the power supply connection in accordance with the national electric code,
ANSI/NFPA 70-1999.
4. Insert the wires into the box, then close the box cover, securing it using the screws
that were previously removed.
Fig.6
A
A
1
2
3
