Xo 360, Owner'S Manual, Page: 24 / 72

24
6.3 MAIN SWITCHES
Main switches control the different power circuits in
the craft. Current feed to devices, such as from the
engine batteries to the engine, can be connected using
switches. The boat’s main switch panel is located on the
right side of the forward end of the engine compartment.
The remote control switches of the main switches are
located on the steering console’s fuse panel. The boat’s
electronic circuits can be opened and closed by the
switches in both the engine compartment and on the
steering console.
When the power circuit is connected on, the switch
background colour is green and marking ON visible and
when the circuit is connected off, the switch background
colour is red and marking OFF visible.
Power supply to the engine is enabled by turning the
switch START 1 and 2 (C and D) to the ON position. Power
supply to the boat’s devices is enabled by turning the
switch Service (B) to the ON position.
When leaving the craft for a longer period of time, please
switch off the power from the main switches but, if
needed, leave direct supply switched on.
1
2
1
2
WARNING !
When removing, connecting or loading batteries
make sure there are no flammable liquids or mate-
rials nearby.
WARNING !
Never switch off the current when the engine is
running, because this may cause damage to the
alternator.