XNET Network Weatherproof Camera Installation Guide
7/20
2.3.2 Camera Module – Bottom
①
Micro SD Card Slot :
Enables recording of video data to an external memory device upon occurrence of
an event. Please use less than 16 GB SD Memory.
②
Video Out :
Use this output to monitor the analog video signal while installing
.
(Select Video Out at menu screen to enable this output)
③
Factory Reset Button :
Press and hold for more than 3 seconds while power is on to recall factory
default settings
④
Power LED :
Lights up
Red when 12V DC power is connected.
⑤
ACT LED :
Lights up Green when the XNET is connected to
100Mbps LAN. Will not light up at 10Mbps
LAN. This will also blink green when there is a network collision.
⑥
Link LED :
Lights up Yellow when the network is properly connected.
