XNET Network Box Camera Installation Manual
7
/ 18
2
2
.
.
3
3
.
.
2
2
.
.
R
R
e
e
a
a
r
r
V
V
i
i
e
e
w
w
Figure 2-2. Network Camera Rear view
MIC / LINE IN:
Connects to auxiliary Audio Device or microphone. 3.5 mm mono/ stereo audio
connector is used. For connection, refer to the figure below:
Figure 2-3. Connector for MIC/LINE INPUT and Audio LINE OUT
LINE OUT
: Audio signal output to a Power Amplified device or Speaker. This can be used to listen to
the audio signal sent from a remote PC for Bi-directional Audio communication.
VIDEO OUT
: Use this output to monitor the analog video signal while installing.
(Select Video Out at menu screen to enable this output)
Factory Reset Button
: Press and hold for more than 3 seconds while power is on to recall factory
default settings
LINE IN(mono)
/MIC IN
GROUND
GROUND
LINE
OUT(mono)
Analog video Output
Network Terminal
RS-485 and alarm Input/ Output
Power Input
for 12 VDC
Factory Reset Button
Recalls initial factory
settings
Event LED
SD CARD Slot
Mic / audio Input
Audio Output
POWER LED
