XMOS XK-XMP-64, Quick Start Manual

Page: 3 / 8

XMOS 2 /7
2 Windows Users
Follow the steps below to get started with the XK-XMP-64 Development Kit.
1. Download and install the tools
• Go to: http://www.xmos.com/downloads and download the Development Tools.
• Run the Windows Installer to install the tools. Follow the instructions
on screen.
2. Connect the XK-XMP-64 to your system.
• Connect the XK-XMP-64 to a USB 2.0 connector on your develop-
ment system, and power up the XK-XMP-64.
• Click No when the N
EW
H
ARDWARE
prompt is displayed on screen
asking you to connect to Windows Update.
• Click Next .
• Select I
NSTALL FROM LIST
and then click Advanced .
• Browse to the drivers installation directory (default P
ROGRAM
F
ILES
/X-
MOS/D
ESKTOP
T
OOLS
/10.4/
DRIVERS
/
XTAG
2) and select the XTAG2
file.
• Click Next and follow the instructions on screen.
• Click Finish to complete the driver installation.
3. Patch the tools (see Section 5 ).
4. Start the tools and follow the XK-XMP-64 tutorial
• Select Start → Programs → XMOS → Desktop Tools → 10.4 →
XMOS Development Environment to start the Tools.
• Click OK when prompted to select a workspace.
• Download the XK-XMP-64 Tutorial from:
http://www.xmos.com/xmp64
The tutorial explains how to write programs that run on the XK-XMP-
64.
XK-XMP-64 Q
UICK
S
TART
G
UIDE
(10.4) 2010/05/13