XMOS xCORE-Analog sliceKIT, Hardware Manual

Page: 29 / 34

xCORE-Analog sliceKIT Hardware Manual 29/33
Note that for quick, low cost boards using low cost PCB manufacturing, the chamfer
is not required and can be generated by hand using a file or similar.
4.4 Connector Pinouts
The pinouts of the four types of sliceCARD are shown below. To cross reference
pin numbers (eg. X0D1) to port names, see here (see § 2.9 ):
4.4.1 STAR
PIN SIDE B (top) SIDE A (bottom)
1 NC NC
2 NC 5V
3 GND NC
4 NC NC
5 3V3 GND
6 X0D2 X0D8
7 X0D3 X0D9
8 GND X0D1
9 X0D4 X0D6
10 X0D10 GND
11 X0D3 X0D7
MECHANICAL KEY
12 X0D14 X0D20
13 X0D15 X0D21
14 CLK GND
15 X0D22 X0D13
16 GND RST_N
17 X0D16 X0D18
18 X0D17 X0D19
XM005221A