5
5.
Reassemble the front and rear unit to battery base according to “Assembling the Car
Chassis on page 6.
Install the Controller Battery
Your controller needs a 9V battery (not included). We recommend 9V alkaline batteries for
best performance. If the LED is off or the range of your car decreases, replace the battery.
1.
Make sure the power switch is OFF, then remove the screw on the battery
compartment.
2.
Insert a 9V battery in the compartment, matching the
polarity symbols (+ and –) marked inside.
3.
Snap the cover back in place and replace the screw.
Battery Notes:
•
For best performance when driving on rough terrain, use the 9.6V
Ni-MH battery option to power your car.
•
Dispose of old batteries promptly and properly. Do not burn or
bury batteries.
•
Use only fresh batteries of the required size and recommended type.
•
Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable),
or rechargeable batteries of different capacities.
•
If you do not plan to use the vehicle for several days, remove the batteries. Batteries can leak
chemicals that can destroy electronic parts.
