PROGRAMMING REGULAR MODE - speed 4
- Turn the
RAPID FIRE OFF.
- Press & Hold the
“A”
button for
8 seconds.
- Release the A button.
- The LEDs will blink 4 times.
- Tap the
“A”
button to
INCREASE
speed.
- Tap the
“B”
button to
DECREASE
speed.
- The LEDs will flash when the
MINIMUM or MAXIMUM
speed are reached.
- You can
test the speed
by pressing the
RIGHT Trigger
at any time.
- To
SAVE & EXIT:
Press & Hold the
LEFT Trigger
and Tap the
MODE
button.
Release the buttons.
The LEDs will blink 4 times.
The programmed speed will work on:
MODE 1 - REGULAR
: 4th speed
MODE 2 - AKIMBO:
3rd speed.
MODE 5 - DUAL:
4th speed.
The mod chip will remember the fire rate even when you turn your controller off or remove the batteries.
Although this chip is very fast, you are still limited by how fast the game allows a weapon to shoot.
It’s important to know that each video game may have a
speed cap.
This cap can be different for every game. If you try to set your Rapid Fire speed above this cap,
your gun will actually
shoot slower, or not shoot at all.
Always try starting out at a slower speed and increase your speed in small intervals. Start out at
a low speed, then increase it until you feel that the gun is starting to "sputter" or slow down.
At that point, you are probably
reaching the game's speed cap.
Many different factors can affect the performance of your Rapid Fire controller, including your
console, the quality of your Internet connection and whether or not you are the current host
of the match.
FACTORY DEFAULT RESET
-Take the BATTERY PACK OUT.
-Press & Hold the MODE button.
-While holding the mode button, insert the Battery Pack.
-The LEDs will flash for 8 seconds
- All settings will be restored to default values.
www.xmodelectronics.com
XMOD Rapid Fire Modded Controller User Guide - XBOX 360