8
NOTE: Hand tighten bolts and lock nuts until machine is fully assembled.
Assembly
Insert the Leg Lever Holder (7) into the Main
Frame (3) and secure with Knob Bolt (15).
Install the Leg Lift Bar (8) to bracket of Leg
Lever Holder (7) using one M10X75 Bolt
(24), two Spacers (34) and one M10 Lock Nut (26).
STEP 10
To use olympic weights, secure the Olympic
Sleeve (35) to the weight tube on the Leg Lift
Bar (8) using the set screw (pre-assembled).
Make sure the set screw is on the bottom of
the adapter. Secure the weight plates (not inclu-
ded) with the 2" Spring Clip (37).
36
36
36
33 33
33
33
33
33
22
22
22
22
22
22
8
7
Insert the Foam Roller Tubes (36) into Leg Lift
Bar (8) and Leg Lever Holder (7). Slide Foam
Rollers (33) onto each end of Foam Roller Tubes
(36) and secure in place using Foam Roller Caps
(22).
Congratulations!! You have completed assembly of your XM-4421.
37
35
8
34
34
24
26
7
3
15
STEP 11
