background image

49

48

You can either follow the general activation and subscription process or use the 
on-board activation guide to activate your Edge and subscribe to the XM service .

General activation and subscription process:

Make sure your Edge is turned on, tuned to channel 1, the XM Preview 
channel, and receiving the XM signal so 
that you can hear the XM audio .

Make a note of the Radio ID . You can 
find it:

• by selecting Radio ID in menu items
• by tuning to channel 0 (zero)
• on a label on the bottom of the  

gift box

• on the label on the back of your Edge

To subscribe: 

• Online: Go to www .xmradio .ca and click on “ACTIVATE RADIO” in the 

top right corner .

 

OR

• By phone: Call 1-877-438-9677 .

Activation usually takes less than 15 
minutes after you have completed 
the subscription process, but 
sometimes may take up to an hour . We 
recommend that your Radio remain 
on until activated . When your service 
is activated, Edge will display an alert 
message . To continue, press any button . 

Subscribe

Turn the Rotary Knob to tune to other channels, and press 

 

or 

 

to browse 

the different categories of channels . Learn what all the buttons do by turning to 
“Navigation Basics” on page 53 .

Activation guide:

For your convenience, Edge has an on-board activation guide . You can activate 
your Radio and subscribe to the XM service by using this guide, where you will 
be guided step-by-step through the subscription process . To access and use the 
guide, simply follow these steps:

Press menu . 

Activate Radio will be highlighted . 
Press the Select button . 

Follow the directions on each 
successive screen until you complete 
the subscription process .

Hardware, subscription and activation fee 
required . Other fees and taxes may apply . 
Month-to-month subscriptions must be activated via telephone . Hardware and 
subscription sold separately . Subscription governed by XM Customer Agreement, 
which can be found at xmradio .ca/about/terms-and-conditions .cfm . Prices and 
programming are subject to change .

1

preview

xmradio.ca

1-877-438-9677

1-877-438-9677

Summary of Contents for EDGE






















































Reviews: