Activating Your XM Receiver
(Optional)
Tuning Modes
Basic Channel Selection
Direct Channel Selection
Category Recall
1. Press
MODE
to select XM Radio.
2. Verify channel 1 (XM Preview Channel) is playing.
3. Select Channel 0. The XM receiver’s eight character Radio
ID number will appear on the XMR6910 display.
The Radio ID number is also located on the top of the
XM receiver unit.
4. Record the number here for future reference:
5. Activate your XM Satellite Radio service.
To subscribe, log onto
http://www.xmradio.com/activation
or
call 1-800-852-9696.
Note:
You will need to keep your XMR6910 turned on for at least
one hour after requesting activation to receive the full
channel line-up.
Press
BAND
to select between XM DIRECT, XM1 and XM2
bands.
Press
TUNE
nn
or
TUNE
ll
momentarily to select the
next available channel. Press and hold to advance quickly.
Press
BAND
to select XM DIRECT channel entry band.
“DIRECT” will momentarily appear in the display. Enter
the desired channel using preset buttons (1-0), then press
FUNC
for 3 seconds to confirm the selected channel. If the
channel is not available, "CH ---" will momentarily appear
in the display and the current channel will be retained.
Press
FUNC
once to display the category of the currently
selected channel for 10 seconds. The CATEGORY icon will
appear on the display.
9
XMR6910
OPERATION
XM Radio Activation
XM Radio - Operation
