XM Satellite Radio XM2GO - MyFi Portable Satellite Radio, User Manual

Page: 18 / 44

18
My XM
2go: Store and play back
Your MyFi lets you store up to five hours of programming
and play it back at a later time or where live signal
reception is limited. Listen to XM wherever you are,
whenever you prefer.
TO STORE BY PRESSING
ONE BUTTON:
1. Turn on your MyFi and select
a channel.
2. Press the “ 2go ” button. To
prevent you from accidentally
recording over a previously
stored program, your MyFi
will ask you to confirm. Press
the “
2go ” button again. The
center of the top line of your
MyFi’s screen switches from
“LIVE” to “REC.”
TIP: Press and hold the “ 2go ” button and you can
automatically bypass the second confirmation “ 2go ”
button press.
3. To stop storing and continue with live programming,
press the “ 2go ” button again. The display reverts to
“LIVE” mode.
TO PLAY BACK:
1. Press the ” mode ” button.
Your MyFi switches from
“LIVE” to “MY XM” and will
begin to play back from the
beginning or where you last
stopped or paused.
2. “MY XM” holds up to five
hours of programming. Press
either the “ ” or “ ” button
to skip to the previous or to the
next song.
3. You can also rotate the dial to
view a list of the stored artists
and songs. Simply highlight an
artist with the dial, then press the dial in to listen to it.
4. To return to LIVE listening, press the “ mode ” button
again.
Caution: Before putting on the headset, always adjust the
volume setting at the lowest level to avoid possible hearing
damage.