Clean the glass where the FM antenna is located. Make sure the surface
is warm (but not hot) and completely dry before continuing.
TIP!
Use your vehicle’s air conditioning or defogger to keep the surface dry
during installation.
3
Position the contact bracket so the arrows align with the antenna. The arrows
indicate the location of the contact strip underneath which must be in
contact with the FM antenna.
The bracket may be mounted either vertically or horizontally, whichever position
allows the most room to attach the coupling clip and run the cables without blocking
the driver’s view.
TIP!
In some cases, it is easier to position the bracket on the inside of the glass
while viewing it from outside the vehicle. Ask a friend to help.
4
When you have determined the proper position for the bracket,
remove the liners from the adhesive pads and press it into place.
Hold the bracket firmly against the glass for 10 to 15 seconds.
TIP!
If the bracket is not in the proper position, you only have a few seconds
to make an adjustment.
TIP!
Adhesive reaches full strength after 24 hours.
Installing with an Inside FM Antenna
