2. Maintenance, care, storage and transport
ATTENTION!
•
Use only a dry and soft cloth for cleaning.
•
Do not use any cleaning agents or chemicals.
•
Store the product in a cool and dry place.
•
Store the product out of reach of children and in a dry and dust-
protected environment when not in use for a longer period of time.
•
Keep the original packaging for transport.
3. Disposal information
According to the European WEEE Directive, electrical and
electronic equipment must not be disposed of with household
waste. Their components must be recycled or disposed of
separately, because toxic and hazardous components can cause
lasting damage to health and the environment if disposed of
improperly. As a consumer, you are obliged under the Electrical
and Electronic Equipment Act (ElektroG) to return electrical and
electronic equipment free of charge at the end of its service life to
the manufacturer, the point of sale or to public collection points
set up for this purpose. Details are regulated by the respective
state law. The symbol on the product, the operating instructions
and/or
the
packaging
indicates
these
regulations.
By
separating, recycling and disposing of old equipment in this way,
you are making an important contribution to protecting our
environment.
4. Packing
Packaging can be disposed of free of charge at the
appropriate collection points - paper in the paper garbage can,
plastics in the yellow bag and glass in the used glass container.
5. EG - Declaration of Conformity
With the CE mark XLOCK, a registered trademark of datamobile,
declares that the product meets the essential requirements and
directives European regulations.
6. Packaging accessories
Minimum distance
To avoid interference
between the locks, keep
a minimum distance of
10 cm. The battery can
otherwise be quickly
discharged. Up to 15
meters with Bluetooth.
Storage
A minimum distance is also mandatory for storage. Do not insert the
battery until before commissioning.
Mounting the lock
Tighten the screws with feeling and do not use drills
or cordless drill or cordless screwdriver.
Disposal
The locks contain electronic
components and belong in the electronic waste.
Instruction manual - EN
Please scan the QR code with
your Smartphone and a website
with all the information will open.
If you are working on a PC, you
can click on the QR code and a
website with all the information will
open.
Dimensions (HxBxD)
Lock: 110 x 110 x 21 mm, locking part: 33 x 20 x
9 mm, keyboard: 90.5 x 60.5 x 12 mm
Weight
Ca. 300 g (locking part, keypad, battery
and screws included in the set)
Temperatur
-10
°
C to +55
°
C (14
°
F to 131
°
F) (depending
on electronics and RFID frequency)
Humidity
20% to 75% relative humidity, non-condensing
Bluetooth-Variante
Bluetooth Low Energy(BLE), Nordic Chipset
RFID Frequenz
13.56 MHz / NFC
RFID-Standards
ISO14443a, NFC, Mifare® C Desfire
Battery
2 x CR123A 3V lithium batteries. Up to 20,000
openings and up to 2 years at +20
°
C (68
°
F).
Run time depends on temperature and use.
The Battery status
The battery status is displayed in the app.
Optionally, there is a message via e-mail.
App / Cloud System
XL Lock Manager APP, Webservice:
; Made in Austria
Size of memory
Up to 200 RFID users, unlimited for XL Lock
Manager App users.
Read distance
5 to 35 mm (0.2''
to 1.38‘’)
depending on
RFID transponder quality, electronics,
antenna position, housing material and
mounting. Up to 15 meters with Bluetooth.
8. Mounting instructions, APP installation
…
© XLOCK,
Errors and misprints excepted
XLOCK 145B
BLE, NFC,PIN, Gateway
Lock (4x)
Keypad(3x)
Screws for wood
mounting
7. Safety information
1x screwdriver
1. Technical details
Locking part (S17)
with 2 screws
and
Lock, mounting material, keyboard
MTA_9 344
403
00
