BOX SPEAKER CONTROLS
2
1
3
4
5
6
7
8
9
10
11
12
13
1.
2.Lift channel line input cannon jack.
Allows you to connect an external audio device (CD / radio / etc),with a cannon
connector.
3.Left high
pass.
Use this in cannon, only allowed 120 Hz ac above through
.
4.On / Off power switch .
Press to power on / off the speaker box.
5.Full range output right
Output signal right.
6.Right channel line input cannon jack.
Allows you to connect an external audio device (CD / radio / etc),with a cannon
connector.
7.Subwoofer volume control.
Set
the
general
volume
level
.
8.Phase .
In single operation use position “normal”. If use a second active cabinet it’s
adviseable depending on positioning of bass cabinets to turn the phase to
180
°
.Try in which position the low frequencies sounds best.
9.Right high
pass.
Use this in cannon, only allowed 120 Hz ac above through.
10.Power indicator
11.Overload indicator
12.AC power .
Use it to connect the AC power cord.
13.Voltage switch to adjust
Select the voltage you want.
Full range output left
Output signal XLR left for to connect an additional ALIVE 12A.
- 3 -
- 4 -
2
3
1
2
3
1
