3
ASTERIA
LIGHTING PROJECTOR
1
aDDREss
DmX address
2
POWER
Power switch
3
DmX INPUT
DMX512 signal input
4
DmX OUTPUT
DMX512 signal output
5
110–220 V / 50–60 Hz
Power input
FuNCTION TABLE:
INSTALLING:
1. Before installing, please make sure you are using a power supply voltage which match with the voltage of
this product.
2. Required of the professionals to install, this product will be firmly fixed, and transferred to the appropriate
projection angle.
3. Install this product, please ensure that at least 0.5 meters away from the port out of range of light there is
no flammable and explosive items (decorations, etc.), and to ensure that the product and the wall for more than
30 cm intervals.
4. Make sure the product and channel cooling fan is not blocked by other objects.
5. Use the lamp to withstand 10 times the weight of the rope through the insurance, the Insurance connector
for auxiliary hoisting rope.
OPERATION wAyS
1. dMX Control
Push the switch 1 and switch 10 of the Address code switch to «ON».
2. Master-slave on-line
1. Connect the lasers as head-to tail (follow the picture):
2. Setting many devices working together (follow the picture):
