background image

 
 
Caution: 
This equipment has been tested and found to comply with the limits for a Class 
B digital device, pursuant to part 15 of the FCC rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or more of 
the following measures: 
-Reorient or relocate the receiving antenna. 
-Increase the separation between the equipment and receiver. 
-Connect the equipment into an outlet on a circuit different from that to which 
the receiver is connected. 
-Consult the dealer or an experienced radio/TV technician for help. 
 
This device complies with part 15 of the FCC rules. Operation is subject to the 
following two conditions: (1) This device may not cause harmful interference, 
and (2) this device must accept any interference received, including 
interference that may cause undesired operation. 
 
Any Changes or modifications not expressly approved by the party responsible 
for compliance could void the user's authority to operate the equipment.

RF Exposure
The equipment complies with FCC radiation exposure limits 
set forth for an uncontrolled environment. This device 
should be installed and operated with minimum distance 
5mm between the radiator & your body.

Summary of Contents for BTS11











Reviews: