FOR OTHER COMPUTER TYPES
The
TORPEDO VERSA 500
comes pre-installed with the computer mount for Garmin bike computers but also includes adapters for Garmin watches,
Wahoo and Polar bike computers, and other strap mounted computers.
TOOLS REQUIRED
2mm Hex Wrench
Torque Wrench up to 10 in lbs (1.1 Nm)
1. Remove the two screws at the top of the computer mount using the 2mm
Hex Wrench.
Strap Mount Computer
Polar Bike Computer
• Garmin Watches and Wahoo Computers: Rotate insert
90 degrees as shown:
• Polar Bike Computers: Remove insert and install Polar
insert as shown:
• Other Strap Mounted Computers: Remove insert and
install strap insert as shown:
3. Reinsert the screws and tighten.
4. Torque both screws to 10 in lbs (1.1 Nm).
5. For strap mounted computers, attach the computer holder to the
VERSA COMPUTER MOUNT
using rubber bands or cable ties as
specified in the manufacturer's instructions.
REV 09/3/2019
2. Depending on the computer used, set up the mount as specified:
BOTTLE CARE
HAND WASH YOUR TORPEDO BOTTLE, STRAW, PLUG, BITE VALVE, AND LID EVERY TIME YOU USE IT AND BEFORE INITIAL FIRST USE.
When cleaning by hand it is not necessary to remove the accessories.
1. Fill
TORPEDO BOTTLE
with soapy water.
2. Use one hand to cover the holes on top of the bottle.
3. Shake bottle vigorously.
4. Rinse and repeat.
STRAW CARE
Hand wash straw in lukewarm water only. Use a long thin brush to clean tube. Hot water or the dishwasher will damage straw material.
WARRANTY
VERSA MOUNTING PLATE
- Limited Lifetime
TORPEDO CARBON CAGE
- Limited Lifetime
TORPEDO COMPUTER MOUNT
- Limited 3 Year
TORPEDO BOTTLE
- Limited 3 Year
All Other Parts
- Limited 6 Month
See website for more details.