AERODYNAMIC ACCESSORIES
INTERMEDIATE KIT INSTRUCTIONS
INTERMEDIATE KIT INSTRUCTIONS
STEP 3 COMPUTER INSTALL (OPTIONAL)
The
TORPEDO SYSTEM 50
is designed to be used with or without a computer in front of the
bottle for optimal visibility and functionality.
Figure (G) & Figure (H)
1. Mount the (optional) XLAB
AERO COMPUTER MOUNT
on the nose of the
TORPEDO MINI MOUNT
with the supplied hardware and instructions.
2. The front edge of the computer should sit slightly behind the rider’s wrist. Slide the mount along the slot on the
TORPEDO MINI MOUNT
to accomplish
this placement and tighten completely to 30 in. lbs of torque. (3.4 Nm)
STEP 4 BOTTLE CARE
WASH YOUR TORPEDO BOTTLE, STRAW, PLUG AND LID EVERY TIME YOU USE IT AND BEFORE INITIAL FIRST USE.
Dishwasher
1. Remove all accessories from the bottle before washing (straw, plug and lids)
2. Wash in top rack only.
Hand Wash
1. Not necessary to remove accessories when cleaning by hand.
2. Fill bottle with soapy water.
3. Use one hand to cover the holes on top of the bottle.
4. Shake bottle vigorously.
5. Rinse and repeat.
Cleaning Straw:
Use long thin brush to clean tube.
WARRANTY
VEE CAGE
– Limited 2 Year
MINI MOUNT ALUM
– Limited 2 Year
TORPEDO BOTTLE
– Limited 2 Year
All Other Parts – Limited 6 Months
‘With’ Figure (G)
‘Without’ Figure (H)
WARRANTY
– Limited 2 Year
WARRANTY
– Limited 2 Year
STEALTH POCKET 400: HELPFUL TIP WHEN INSTALLING
When tightening the strap around your top tube, make sure you do not tuck excess strap in between the top tube and bag.
Excess strap material underneath the bag will reduce the gripping power of the bag.
NANOFLATOR INSTRUCTIONS
IMPORTANT: Please completely understand all user instructions and safety information before using this product.
1. PREPARE INFLATOR
NOTE: Do not activate a CO
2
cartridge until ready to use. Threaded CO
2
cartridges: Thread cartridge into the threaded base of inflator until the cartridge just
contacts the puncture pin, then quickly and firmly twist to puncture (activate) the CO
2
cartridge. Inflator is now charged.
2. CONNECT TO TIRE VALVE
IMPORTANT: Presta valve MUST be opened before inflating tire. Failure to open valve completely may cause injury or damage to inflator.
Presta & Schrader valves: Thread the head of the
NANOFLATOR
directly onto the tire valve.
3. CONTROLLABLY INFLATE
IMPORTANT: Hold CO
2
cartridge upright for best results. Twist the black knob counter clockwise to release CO
2
into the tire. Do not unthread CO until air
has been completely released. CAUTION: CO
2
cartridge must be completely empty before removal from inflator. An activated cartridge removed from an
inflator is dangerous! Do not over-inflate tire as injury can result. To remove inflator, unscrew the head from the tire valve.
CO
2
CARTRIDGES CAUTION
CONTENTS UNDER PRESSURE. DO NOT PUNCTURE OR HEAT ABOVE 120F / 49C. DO NOT INHALE OR DISCHARGE TOWARDS FACE OR BODY. KEEP CARTRIDGE AND DISPENSER OUT THE REACH OF CHILDREN.
DO NOT LEAVE IN ENCLOSED VEHICLE AS RUPTURE MAY OCCUR DUE TO OVERHEATING AND MAY CAUSE INJURY.
2
C
M
Y
CM
MY
CY
CMY
K
