Xitrix DeskFrame MX-910 User Manual Download Page 78

Page: 78 / 89

- 72 -

Chapter 6: Troubleshooting

Wait until files have been printed before sending additional files to the printer.

If you print large files or many files at one time, you may want to add additional

memory to the printer. See the printer documentation for instructions for adding

additional memory.

You see a “Printer is out of paper” error message

After adding paper, make sure that the printer is online. Most printers have an

online/offline button that you need to press after adding paper.

Sound

You are not getting sound from the speakers

Make sure that the speakers are turned on.

Make sure that the volume controls are turned up. For more information, see

“Adjusting the volume” on page 21

Make sure that mute controls are turned off. For more information, see

“Adjusting

the volume” on page 21

If you are using external speakers, see the speaker setup poster to check your

speaker connections.

Summary of Contents for DeskFrame MX-910


























































































Search results

Summary of Contents for DeskFrame MX-910

Reviews:

Related manuals for DeskFrame MX-910

Brands by name

Popular brands

Xitrix DeskFrame MX-910, User Manual

Search results

Summary of Contents for DeskFrame MX-910

Reviews:

Related manuals for DeskFrame MX-910

Brands by name

Popular brands