XITONG GT06, User Manual

Page: 5 / 12

5 / 12
power installation, choose a separate grounding or grounding , not connected with other common ground . If
ACC auto- theft feature is required, being sure to connect the ACC line , the device state to decide whether to
enter the ACC fortified state ; Without access ACC line, the vehicle will enter the fortified state , vibration
occurs at the maximum security state of the vehicle is running , it will trigger vibration alarm .
3.5 Proper use of the product : Installation
→
Power
→
Settings
→
Registration
Installation : The installation , you should make the GPS antenna towards the sky , above themounting location
must be no electromagnetic wave absorption materialQuality ( such as metal , heat -proof membrane ) occlusion
place.
Power : the SIM card installed in the right direction , according to the terminal wiringdirection , according to the
terminal wiringswitch.Settings: must be done , or can not perform other operations , the use of owner’s mobile
phoneto send text messages to set a specific number to the owner of the terminal number and SIM card .
Registration : registration method based on different dealer’s platforms. registration method is different , please
consult your dealer.
3.6 Indicator Description
3.6.1 Red LED---indicate charge sate
state means
Flashing(every 2 second) charging was completed 、 normal
ti
No light Power is low / no boot
3.6.2
yellow
LED--- indicate the GSM signal state
state means
Flashing(every 2 second) GSM initializing
Constant Lighting Normal GPRS communications / online
No light GSM sleep
3.6.3
blue
LED--- indicate the GPS signal state
state
means
Flashing(every 2 second) GPS Seach Signal
Constant Lighting
working and has located
No light GPS sleep
.4. User
Note : GPS vehicle positioning terminal communicationsset parameters via SMS , the owner’s phone number to
send SMS code to the GPS vehicle positioning terminal communication SIM card number, separated by a
comma symbol , the following function parameter setting instruction format Comma English input state format.
4.1 owner’s password setting : the owner can only bind a number ,the last number of owners is valid default
owner password is: 123456 Set the owner number instruction are : admin123456 13712345678