TOKINA 10-17
LENS WITH FOCUS
RING, 1.4X EXTENSION
RING AND GEAR
TOKINA 10-17
LENS WITH FOCUS
RING, 2X EXTENSION
RING AND GEAR
Revsion 2.0 - APR2013
www.xit404.com
TOKINA FISHEYE 10-17mm 3.5-4.5:2.8 (CANON)
FOCUS RING ASSEMBLY INSTRUCTIONS AND WARRANTY INFORMATION
1.4X TELE
EXTENSION
RING
2X TELE
EXTENSION
RING
SHOWING
THE
UNLOCKED
POSITION
RED GEAR
LENS WITH
FOCUS RING
ATTACHED
ORIENT GEAR IN
THE UNLOCKED
POSITION
ROTATE INTO
LOCKED POSITION
RED LATCH
NOTE:
THE SLIP RING IS NOT NEEDED
WHEN USING TELECONVETERS
FDM parts - a brief description
Xit 404 manufactures a number of its parts using a process called Fused Deposition Modeling (FDM). This process involves extruding a thread of plastic and laying it down
in thin layers to build a part. This enables us to supply you products that enhance your underwater photography and videography.
Care and Maintenance
The FDM part is impact resistant and will withstand most drops from table height. However, as with all plastic parts, they cannot withstand excessive pressure and
force without breaking. Being careful means handling the product during assembly with a light touch, do not force.
If your part gets wet let it drip-dry for about an hour. If you have to pack it before it is dry then wrap it in something absorbent such as a paper towel, tee shirt or sock
and put it into a plastic bag. This will keep your other parts from getting dripped on.
FDM Plastic Part Warranty
FDM parts are guaranteed to be free of manufacturing defects for a period of one year from date of purchase. Unnecessary force can cause excessive wear and
possibly break the parts voiding warranty. Damaged or broken parts will be inspected. If Xit 404 determines that the parts were misused or abused, warranty will be void.
Valid purchase receipt isrequired for all warranty claims.
