XISHE C-3718 Instruction Manual Download Page 2

Assembly Instruction

Instructions For Use

1

2

3

4

5

CAUTION: 

* Before using the chair, check to ensure that all bolts are fully tightened.
* Lubricate all parts and tighten all bolts every 6 months or whenever needed.

Turn the Base 

(F)

 upside down, insert the Legs 

(G)

*5 into the Base 

one by one. Use Wrench 

(M)

, secure both with Bolts 

(K)

*10.

Press Casters 

(H)

*5 into the holes at the end of Legs 

(G)

*5. 

7

Using Wrench 

(M)

, 100% tighten the previously installed 

Bolts 

(I)

*4 on the Armrests 

(C)

x1Lx1R. Align the hole on 

Mechanism 

(D)

 with Gas Lift 

(E)

, and press the Chair down 

until it is fully secured.

8

Finish the installation.

Insert the Gas Lift 

(E)

 into the Base 

(F)

.

Using Wrench 

(M)

, install Armrests 

(C)

x1Lx1R to both sides of the 

Backrest 

(A)

 with Bolts 

(I)

*4.

NOTE:

 

1.Bolts 

(I)

 are only tightened 50%.

2.Armrests 

(C)

x1Lx1R are marked with "L" (Left) and "R" (Right) to show 

which side they should be installed.

NOTE:

 

The Seat 

(B)

 is marked with "FRONT", 

please make sure the installation 

direction is correct.

NOTE:

 

Make sure the “

FRONT

” direction of 

Mechanism 

(D)

 and Seat 

(B)

 are the same.

Turn the Seat 

(B)

 upside down . Using Wrench 

(M)

, install 

Armrests 

(C)

x1Lx1R to the Seat with Bolts 

(J)

*6.

6

Using Wrench 

(M)

, attach Mechanism 

(D) 

to the Seat 

(B)

 with Bolts 

(L)

*4.

(K)* 2

(I)* 4

(J)* 3

(J)* 3

(L)* 4

(D)

(B)

50%

100%

(G)

(E)

(A)

(C)

(G)

(F)

(H)

(F)

FR

ONT

Reviews: