Xirgo Global
Chemijos st. 15 LT-51332, Kaunas, Lithuania
www.xirgoglobal.com
1.6.
Installation
FMS500 TACHO SDK is installed where risk of mechanical damage, high humidity and extreme heat is
low. Device is mounted stable to vehicle body, therefore ensuring correct operation of the internal
accelerometer. Complete installation manual is available as Annex 1.
1.7.
Configuration
FMS500 TACHO SDK is to be configured via a configuration server, where dealers/users can adjust
operation of their devices to fulfill specific requirements.
1.8.
Support
FMS500 TACHO SDK is built to be a reliable, stable and easy to install device. Please read and follow
provided installation and operating instructions carefully. However, if you encounter difficulties while
installing or using this product, technical support is available and may be reached by e-mail
1.9.
Document versions
Table 6. Document versions
Version
Date
Changes
1.0
2017-07-04
Document created.
2.0
2020-04-23
Specifications table updated.
Diagnostic LED section updated
Installation instructions updated
