9
2.1.2
Rugged Camera
The RJ-45 cable of the rugged camera is either IP66 RJ-45 cable or RJ-45 lite
cable. Refer to the cable type and follow the instructions below to connect
Ethernet cable and waterproof connector.
IP66 RJ-45 Cable
RJ-45 Lite Cable
IP66 RJ-45 Cable 1 / IP66 RJ-45 Cable 2
For IP66 RJ-45 cable, please use an RJ-45 IP66 plug for connection to prevent
water damage. Follow the steps below for cable connection.
Step 1:
Take out the supplied connector from the
RJ-45 IP66 plug. Loosen the thread-lock
sealing nut on the plug. Then thread the
Ethernet cable through the thread-lock
sealing nut and the plug. If the Ethernet cable
is already attached to a connector, please
remove it first.
Step 2:
Carefully remove a section of rubber coating
from the end of the Ethernet cable to reveal
the wires. Inset the wires to the correct pins
of the connector. Plug the Ethernet cable to
the connector of IP66 RJ-45 cable.
Step 3:
Fasten the RJ-45 IP66 plug to the connector
of the IP66 RJ-45 cable. Lastly, tighten the
thread-lock sealing nut to the plug.
