12
2.3
Connect Alarm I/O (Indoor Only)
The camera equips one alarm input and one relay output for alarm application.
Refer to the alarm pin definition below to connect alarm devices to the camera.
PIN 1: Input
−
PIN 3: Output
−
PIN 2: Input +
PIN 4:
2.4
Waterproof Cable Connectors (Outdoor Only)
Follow the instruction below to waterproof the connectors of different types of
cables. The supported cables are as shown below, from left to right are: RJ-45 &
DC 12V Cable, RJ-45 Cable, IP66 RJ-45 Cable 1 and IP66 RJ-45 Cable 2.
RJ-45 & DC 12V Cable
Follow the steps below to waterproof the connectors of the RJ-45 & DC 12V
cable.
Step 1:
Connect the required devices to the RJ-45
& DC 12V cable and coat the joints with
silicone gel. There should be no gap
between the connectors and the cables.
Step 2:
Seal the spot indicated in the figure on the
right with silicone gel. Make sure there is
no gap between the cables and the hole;
otherwise, waterproof function cannot be
guaranteed.
