Installation
Step 1
Make an opening in your cabinet or false wall that measures 363mm x 480mm (14 9/32” x 18 7/8” ). Ensure the opening is
perfectly square. Your cabinet or false wall opening will need to provide support to the bottom of the entire speaker.
Warning: Make sure there aren’t any other wires, pipes, or other fixtures that might be in the wall before cutting.
Step 2
Install your speaker wire through the back of your cabinet of false wall and connect it to the EP500 In-Cabinet. (See illustrations on
next page) Slide the speaker into your cabinet or wall cutout.
Paintable Models
Step 1
Apply painters tape along painted edge keeping off the raw material.
Step 2
Apply paint to edge with paint brush.
When dry remove tape.
k
l
m
n
o r
j
q
p
s
Summary of Contents for EP500
Page 1: ...EP500 v4 In Cabinet Subwoofer...
Page 2: ......
