background image

 

 

 

  Demolition Hammer

 

                                                                                                             

      Model: XP-G65BH

 

 

HANDLING INSTRUCTIONS 

 
 

 

 

 

With active vibration reducing system   

 

 Original Instructions      

though these 

HANDLING INSTRUCTIONS

. Ensure that you know how the machine 

works, and how it should be operated. Maintain the machine in

 

accordance with the 

instructions, and make certain that the machine work correctly, please store this instriation 
and other enclosed documents with the machine togeth

                                                                     

 

                   

                                                                                                                     

                                                                                                                                                           

Bj:2012

 

Zhejiang Xinpu Industrial & Commercial Co., Ltd. 

106, No. 330 National Road, Huajie Industrial Zone, Yongkang City, Zhejiang 321300,    P. R. China 

Summary of Contents for XP-G65BH

















Reviews: