Xinje XP3-18R, Manual, Page: 26 / 43

XP3 PLC/HMI Hardware Manual Page 26 of 42 LMAN007_R2V2

Create a new screen
 To open: choose Menu  Tool  New or directly choose “New” or click in the
tool bar.
 Method: each screen corresponds with a screen number, it can only be changed when
the screen is created. Screen description is used as a brief introduction or prompt or
Memo, you could also make no description.

Screen Attribute

To open: Choose “Menu

Tool

Screen Attribute; or directly double-click the screen
in the left column; or directly click in the top menu.
 Method: In this property window, you could change the screen description. Key“
∧
” and
“
∨
” are usually used for screen jump. In the screen, if you add key“
∧
” or key “
∨
”, also
make some corresponding setting, and then in the screen property, these two keys will
be of no use.