6
Additional Features
In the iTracing App, click on the settings tab in the bottom navigation, and you will see a variety of options available.
1. Location List - To set a location on your map, go into the Map in the iTracing App, and press the button once and it
will save your location in the “Location List” for the map;
a. This is helpful if you have forgotten where you parked, because you can go back into the Location List and
select that location of where you marked for your parked car. Once selected it will show you the location on the
embedded map.
2. Range - To change the range of the connection on your Smart Tag, go into the settings screen, and select the
desired distance under the “Alarm Distance Setting” section;
3. Do Not Disturb - To end “ Do Not Disturb “ mode, slide the switch from “Off” to “On”. you will prompted with a
notification asking if you are sure you want to turn on this function;
4. App Password - You can set a password for this app, so that when the app is opened, a password must be entered;
5. Map Switch - This will give you the option to switch between different maps to use when using the “Location”
functionality;
6. Double Click Setting - This will allow you to turn on or off the double click setting for the alarm;
7. The Smart Tag will beep for 30 seconds when disconnected with your phone.
Specifications
Bluetooth Version
Bluetooth 4.0 low power
Compatible Models
IOS 7.0 and up, Android systems 4.0 and up
Working distance
≤
25meters (Without any barriers)
Running Conditions
Temperature-10°C~+50°C, Relative Humidity 10%~90%
Warning: Don’t expose to open heat sources or throw in fire, keep away from
water and wet surfaces.
Battery type
Lithium button battery CR2032 3V
Standby time
3 months
