2
3
ENGLISH
Congratulations on your digital photo frame with alarm clock!
Features:
• Screen: 3.5” TFT LCD (Resolution 320*240)
• Alarm function
• Supports automatic and manual view.
• Supports JPEG picture files
• Supported Memory Cards:SD/MMC/SDHC(32MB~16GB)
• Display: Month, Day, Time (12/24h format can be selected)
• With battery compartment (1 x AAA) for the operation of the clock
• Power supply: DC5V/ 500mA
Installation:
1. Connect the 5VDC cable to the 5VDC input jack and then connect the AC
power plug to the wall socket
2. To retain the clock time and the set alarm time in the event of a power
failure or disconnection, insert 1 AAA size battery (not supplied) into the
battery compartment.
3. Insert a suitable SD / SDHC/ MMC card, contact the pins facing the front of
Digital Photo Frame.
Key Functions:
1. ROTATION: Rotate photos
2. MENU: Enter the Setup Mode / Press and hold the menu button for 5
seconds to turn off the screen
3. ENTER: Press to enter the select mode or thumbnail mode (9 pictures will
be displayed on the LCD)
4.
◄
View last picture/ backward function
5.
►
View next picture/ forward function
Operation:
1. Power on: After power on, “Welcome” will appear on the screen. If there is
no memory card placed yet, it will also show “No card”. Insert a suitable SD/
SDHC/ MMC card and make sure the pins face the front of the Digital Photo
frame
NOTE: Make sure the images are in JPEG format and smaller than 8000 x
6000 pixels.
2. Screen off : In normal show, press and hold the Menu button for 5 seconds
to switch off the screen. Press the Menu button again to switch it on.
3 Adjust slideshow time or manual mode: Press the Menu button to enter the
Setup menu and press the Enter button to select the Interval Time. Press
◄
and
►
to change the interval time to 5 second,10 second,15 second,30 second,1
minute,2 minutes or manual mode. Press the Enter button to confirm.
4. Transition effect: in the SETUP menu, press the Enter button to select the
transition effect. Use the
◄
and
►
buttons to select the desired effect.
5. Browse: In the SETUP menu, press ENTER button to select Browse and
press
◄
and
►
to select.
6. Adjust the LCD contrast: In the SETUP menu, press ENTER button to select
“Contrast”. Press
◄
and
►
to adjust the LCD contrast.
7. Adjust LCD Brightness: In the SETUP menu, press ENTER button to select
“Brightness”. Press
◄
and
►
to adjust the LCD brightness..
8. Default setting: In the SETUP menu, press ENTER button to select “Default”.
Press
◄
and
►
to select. After setting, press the Menu button to return to the
slideshow mode from the setup menu
Thumbnail mode:
In Slide Show Mode, press the Enter button to enter the thumbnail model. Nine
pictures will be displayed on the LCD. Press
◄
and
►
to select the picture.
Press Enter button to confirm.
Alarm clock function
Set time and alarm time
• Press the [Mode] key once in standby mode, the alarm time will blink on the
LCD display. Press the [Set] key to enable/disable the alarm function.
• Press the [Mode] key again. The hours of the alarm time will blink on the
LCD. Press the [Set] key to set the hours of the alarm time.
• Press the [Mode] key to set the minutes of the alarm time. The minutes of
the alarm time will blink on the LCD. Press the [Set] key to set the minutes
of alarm time.
• Press the [Mode] key for month setting. The month will blink on the LCD.
Press the [Set] key to set the month.
• Press the [Mode] key for date setting. The date will blink on the LCD. Press
the [Set] key to set the date.
• Press the [Mode] key for time setting. The hour will blink on the LCD. Press
the [Set] key to set the hour. You can select 12/24h display. For 12h display,
PM will be displayed at the left of the LCD.
• Press the [Mode] key for minute setting. The minute will blink on the LCD.
Press the [Set] key to set the minute.
• After the minute setting, press the [Mode] key to return to normal mode
and then press the [Set] key to start the clock running.
Set the alarm and chime On/Off
• Press the [Mode] key once in normal mode. The AL icon shows on LCD and
the alarm time blinks.
• Press the [Set] key to turn the alarm On.
• After selecting alarm On/Off, press the [Mode] key three times to return to
standby mode.
Check the alarm time and date
• Press the [Set] key in normal mode. The “AL” icon and the alarm time will
show on the LCD.
• Press the [Set] key twice in normal mode. The month and date will show
on the LCD.
• Press the [Set] key three times in standby mode. The seconds of the cur-
rent time will show on the LCD.
• Press the [Set] key again to return to standby mode. The sequence is Alarm
Time -> Month & Date -> Second -> Standby Mode.